Hoist Push Button Switch Schneider XACA881 6 Arah+On+Stop Single Speed

Range of product : Harmony XAC
Product or component type : Pendant control station
Device short name : XACA

COMPLEMEMTARY
Control station type : Double insulated
Enclosure material : Polypropylene
Electrical circuit type : Control circuit
Enclosure type : Complete ready for use
Control station application : Control of single speed hoist motor
Control station composition : 8 push-buttons

Control button type :
> First push-button 1 NC + 1 NO raise, slow
> Second push-button 1 NC + 1 NO lower, slow
> Fourth push-button 1 NC + 1 NO left, slow
> Third push-button 1 NC + 1 NO right, slow
> Fifth push-button 1 NC + 1 NO forward slow
> Sixth push-button 1 NC + 1 NO reverse, slow
> Eighth push-button 1 NC + 1 NO O
> Seventh push-button 1 NC + 1 NO I

Product compatibility : ZB2BE102 + ZB2BE101 for each direction
Mechanical interlocking : With mechanical interlocking between pairs
Control station colour : Yellow

Connections – terminals :
> Screw clamp terminals, 1 x 0.5…1 x 2.5 mm² without cable end
> Screw clamp terminals, 1 x 0.5…2 x 1.5 mm² with cable end

Standards EN/IEC 60947-5-1:
> UL 508
> CSA C22.2 No 14
> EN/IEC 60204-32

Product certifications :
> GOST
> CCC
Protective treatment : TH
Ambient air temperature for operation : -25…70 °C
Ambient air temperature for storage : -40…70 °C
Vibration resistance : 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
Shock resistance : 100 gn conforming to IEC 60068-2-27
Overvoltage category : Class II conforming to IEC 61140
IP degree of protection : IP65 conforming to IEC 60529
IK degree of protection : IK08 conforming to EN 50102
Mechanical durability : 1000000 cycles
Cable entry Rubber sleeve with stepped entry 8…26 mm
Cable entry : Rubber sleeve with stepped entry 8…26 mm